Park Tool DT-1 Disc Mounting Facing Tool
CHEAP,Discount,Buy,Sale,Bestsellers,Good,For,REVIEW, Park Tool DT-1 Disc Mounting Facing ToolPark ToolDT-1,Wholesale,Promotions,Shopping,Shipping,Park Tool DT-1 Disc Mounting Facing ToolPark ToolDT-1,BestSelling,Off,Savings,Gifts,Cool,Hot,Top,Sellers,Overview,Specifications,Feature,on sale,Park Tool DT-1 Disc Mounting Facing ToolPark ToolDT-1 Park Tool DT-1 Disc Mounting Facing ToolPark ToolDT-1
Park Tool DT-1 Disc Mounting Facing Tool Overview
The DT-1 works on 135mm rear frames with the "standard" 10mm axle dropouts, and 12mm through axles by using a spacer included with the kit. The DT-1 also works on front forks with 100mm axle width and a 9mm axle dropout, and with 20mm through axles by using a spacer included with the kit. For bikes with the 12mm through axle, use the axle from the bike and the bushing included with the DT-1. For 20mm front forks, use the axle from the fork and the bushing included with the DT-1.
Park Tool DT-1 Disc Mounting Facing Tool Feature
- The DT-1 is designed to perfectly machine the face of each tab, removing paint and material to create a flat surface.
- The DT-1 works on 135mm rear frames with the "standard" 10mm axle dropouts, and 12mm through axles by using a spacer included with the kit.
- The DT-1 also works on front forks with 100mm axle width and a 9mm axle dropout, and with 20mm through axles by using a spacer included with the kit.
- For bikes with the 12mm through axle, use the axle from the bike and the bushing included with the DT-1.
- For 20mm front forks, use the axle from the fork and the bushing included with the DT-1.
